Indoor RGBW pixel wall washer with 18 × 10W LEDs, individual LED control and a standard 25° beam. Supports DMX512/RDM with 4, 8 or 72 channels. Rated power is 200W; IP20 housing measures 1000 × 80 × 100 mm and weighs 8 kg.
|
Optical System Light Source: 18 × 10W RGBW LEDs Beam Angle: Standard 25°, optional 20°–45° LED Lifespan: 50,000–100,000 hours |
Color & Effects System CCT Adjustment: 3200K–8500K linear adjustment Pixel Control: Individual LED control Built-in Effects: Chasing, running and dynamic pixel effects Dimming: 0–100% smooth electronic linear dimming Strobe: Independent high-speed strobe Video Performance: Flicker-free output for photography and video recording Tilt Angle: 175° |
|
Control System Control Modes: DMX512 / RDM, manual, auto-run and master/slave control Signal Options: Wired DMX / wireless DMX optional DMX Channels: 4 / 8 / 72 channels |
Electrical Input Voltage: AC100–240V, 50/60Hz Rated Power: 200W |
|
Construction & Protection Housing: Die-cast aluminum alloy Cooling System: Heat sink + intelligent low-noise fan Temperature Protection: Built-in thermal sensor with automatic power adjustment Working Temperature: -10°C to 40°C Connection: 3-pin waterproof connector, power and signal daisy-chain connection IP Rating: IP20 |
Dimensions Dimensions: L1000 × W80 × H100 mm Net Weight: 8 kg |
Use Astra Bar 18P for indoor stage backdrops, wall washes and linear pixel effects. Individual LED control enables chases and running effects, with 3200K–8500K CCT adjustment and smooth electronic dimming. Wired DMX is supported; wireless DMX is optional. The standard beam is 25°, with optional beam configurations from 20° to 45°. The die-cast aluminum fixture uses a heat sink and an intelligent low-noise fan.