MotionRing 3640 - 36×40W RGBW Kinetic Beam Ring Light
36×40W RGBW Kinetic Beam Ring Light
A high-output RGBW kinetic beam ring designed for dynamic aerial effects and synchronized vertical motion, combining powerful beam output with precise lifting control for stage and event installations.
Introduction
|
Beam Ring LED Source: 36 × 40W RGBW 4-in-1 imported LEDs Ring Dimensions:: Outer Diameter 120cm, Inner Diameter 100cm Ring Weight: 22kg Power Consumption: 750W Display Type: Digital button panel |
Lifting System Number of Lifters: 3 units Load Capacity per Unit: 10kg Lifting Stroke: 6 meters Maximum Speed: 0.4 m/s Power Consumption per Lifter: 400W × 3 Lifter Display: Touch button panel Synchronization Error: Less than 6mm Control Protocol: DMX-512 Channel Modes: 4CH / 9CH / 144CH Control Interface: 3-pin XLR input/output Safety Mechanisms: Mechanical brake, electronic protection, screw gear reducer Mounting Method: Vertical hanging installation |
|
Electrical Input Voltage: AC 90V–240V, 50/60Hz IP Rating: IP20 Operating Temperature: -10°C to +50°C Load-bearing Cable: 7mm diameter Total Net Weight: 20kg × 3 (lifters), 22kg × 1 (ring) |
Technical Reference
• 36×40W RGBW 4-in-1 LEDs delivering high-intensity beam effects
• Large-format beam ring with 120cm outer diameter for strong visual presence
• Three synchronized kinetic lifters with high positional accuracy
• Smooth vertical travel up to 6 meters with maximum speed of 0.4 m/s
• Multiple DMX channel modes supporting pixel-level and group control
• Integrated safety system including mechanical brake and electronic protection
Photos & Videos
Item: Light Source
Value: 36×40W RGBW 4-in-1 LEDs
Item: Ring Size
Value: Ø1200mm (outer) / Ø1000mm (inner)
Item: Ring Weight
Value: 22 kg
Item: Ring Power
Value: 750W
Item: Lifting System
Value: 3 synchronized lifters
Item: Lifting Stroke
Value: 6 m
Item: Max Speed
Value: 0.4 m/s
Item: Control Protocol
Value: DMX512
Item: IP Rating
Value: IP20
Applications
MotionRing 3640 integrates a circular RGBW beam array optimized for aerial beam effects and spatial compositions.
The ring structure enables uniform beam distribution while maintaining visual balance during vertical motion.
Pattern & Beam Shaping
Framing: —
Gobo: —
Frost: —
Color & Rendering
RGBW color mixing allows saturated beam colors as well as clean white output for contrast effects.
Color performance remains consistent throughout the full lifting range.
Color Tools
• RGBW color mixing
• Individual pixel control (in extended channel modes)
Kinetic & Lifting System
The kinetic system consists of three independent lifters operating in synchronized motion.
Precision control ensures minimal positioning deviation during dynamic cues.
Lifting System Details
• Lifters: 3 units
• Load capacity: 10 kg per lifter
• Stroke: 6 m
• Synchronization error: < 6 mm
• Drive system: screw gear reducer
• Safety: mechanical brake + electronic protection
Control & UI
DMX512 control supports multiple channel personalities for different programming requirements, from basic motion control to pixel-level beam effects.
Both ring and lifters feature onboard digital control panels for setup and diagnostics.
Control & Operation
• Protocol: DMX512
• Channel modes: 4CH / 9CH / 144CH
• Signal interface: 3-pin XLR in/out
• Local control: digital button panel
Usage Notes / Boundaries
• Designed for indoor stages, exhibitions, and event installations
• Requires professional rigging and load-rated suspension points
• Not intended for outdoor or moisture-exposed environments (IP20)
Downloads
Datasheet (PDF)
System Wiring Diagram
User Manual (PDF)
Dimensional & Rigging Drawings (PDF / DWG)
More Products
-
Astra Par 4Z - 4×60W RGBW Zoom LED Par
-
Storm B2 - 2-Eye LED Blinder
-
Axis 480 - 480W LED BSW Hybrid with CMY & CTO
-
Prime Panel 1200 - LED Conference Panel Light