MotionBlade 1060 IP - 10×60W RGBW Zoom Bar IP65

• 10×60W RGBW LEDs for high-output linear wash coverage
• Integrated CW/WW/RGB pixel segments for layered strobe effects
• Dual-range zoom supporting narrow beams and wide field coverage
• High luminous flux suitable for outdoor stages and large venues
• Multiple DMX channel configurations for pixel-level control
• IP65-rated construction for weather-exposed applications

Item: Main Light Source
Value: 10×60W RGBW LEDs

Item: Strobe Segments
Value: 96×3W CW + 96×3W WW + 96×0.5W RGB LEDs

Item: Luminous Flux
Value: 22,400 lm

Item: White CCT
Value: 6300K

Item: Zoom Range
Value: Beam 2.8°–31° / Field 5°–46°

Item: LED Lifetime
Value: 20,000 hours

Item: Control Protocols
Value: DMX512, RDM

Item: Channel Configurations
Value: 17 / 27 / 99 / 108 / 168 / 8+100 / 8+160 / 170 CH

Item: Movement
Value: Tilt 202°

Item: IP Rating
Value: IP65

MotionBlade 1060 IP provides flexible linear coverage through a dual-range motorized zoom system.
The optical design supports tight beam lines, mid-angle effects, and wide-area washes without fixture repositioning.

Optical Control

• Beam angle: 2.8°–31°
• Field angle: 5°–46°

Color Mixing & Pixel Structure

The fixture combines high-power RGBW wash LEDs with dedicated CW, WW, and RGB pixel strobe segments.
This layered architecture allows independent control of wash output and pixel effects within a single bar.

Color & Pixel System

• RGBW main wash LEDs
• CW / WW white pixel segments
• RGB pixel strobe segments

Dimming & Strobe

Independent control enables precise intensity shaping and dynamic strobe effects.

Dimming & Strobe

• Dimming: 0–100% electronic linear dimming
• Strobe: Pixel-based and global strobe effects

Movement & Control

Motorized tilt supports accurate beam placement and repeatable linear movement effects.

Movement

• Tilt range: 202°

Control & Operation

• Protocols: DMX512, RDM
• Channel modes: 7 options, up to 170CH
• Control panel: LCD display with 5 buttons
• Software: Upgradeable via DMX

Power & Connectivity

Designed for outdoor deployment with sealed connectors and signal flexibility.

Power & Signal

• Input voltage: AC180–240V, 50/60Hz
• Power consumption: 850W
• Power connectors: Waterproof power in/out
• Signal interfaces: 3-pin / 5-pin XLR, RJ45

Construction & Environment

Built for outdoor operation with reinforced housing and thermal stability.

Environment & Protection

• IP rating: IP65
• Suitable for rain-exposed and temporary outdoor installations

Usage Notes / Boundaries

• Designed for outdoor linear wash and pixel-based strobe effects
• High channel-count modes require careful console and network planning
• Not intended for profile projection or framing applications

Downloads

Datasheet (PDF)
Photometrics (IES/LDT)
User Manual (PDF)
Dimensional Drawing (PDF / DWG)